Splices
Back to net & rope index
Splices join ropes permanently while leaving the rope almost as strong as originally. The strongest is the short splice but it forms a swollen join which will not pass over a block. The long splice is a little less strong but the rope diameter remains the same.The eye splice and back splice have special purposes: the back splice preventing fraying or unraveling in the end of the rope, being more durable and lasting than whipping; the eye splice being the strongest type of rope loop.
ShortSplice not found
Short splice
Short splice:
  • If the rope is large, make temporary whippings on the ends of the strands.
  • Unlay (untwist) the ropes a few turns.
  • A. Alternate the strands of the 2 ropes.
  • B. Tie strands down to prevent more unlaying.
  • C. Tuck strand 1 over an opposing strand and under the next strand.
  • D. Tuck of strand 2 goes over strand 5, undr the 2nd, out between 2nd & 3rd.
  • E. Repeat for strands 1 & 3 from the same rope end.
  • F. Remove tie and repeat operation on other rope end.
  • Make 2 or more tucks for each strand, then roll the tucks and cut off the ends.
  • Smooth the splice by rolling on the floor under your foot.
Back to Contents
LongSplice not found
Long splice
Long splice:
  • A. Unlay each rope end about 15 turns. Place the 2 rope ends together, alternating tstrands of each end.
  • B. Using opposite pairs, unlay one end 4 and fill its place with the partner strand 2. Repeat exactly with another pair of strands 1 & 6 in oppositie direction.
  • C. Trim the longer strand 4 and tie each pair of opposing strands 2 & 4 with an overhand knot, tucking each strand twice. The tuck goes over one strand, under the 2nd, and out between 2nd & 3rd.
  • Strands 3 & 5 are simply tied with an overhand knot.
  • Strands 1 & 6 are halved, and opposite strands tied wihth an overhand before tucking.
  • D. Roll and pound all tucks into the rope and then clip the individual strand ends.
Back to Contents
BackSplice 1 not found BackSplice 2 not found BackSplice 3 not found BackSplice 4 not found BackSplice 5 not found BackSplice 6 not found
Back splice
Back splice:
  • Unlay to make a crown knot as shown in A, B & C.
  • The ends are then tucked as in the short splice with the same over-and-under movement. See D & E.
  • Finish by trimming the ends and smoothing the splice by rolling on the floor under your foot.
Back to Contents
EyeSplice 1 not found EyeSplice 2 not found
EyeSplice 3 not foundEyeSplice 4 not found
Eye splice
Eye splice:
  • Like the short splice, it is woven one over, one under. Strands may be loosened for tucking by twisting the rope in the direction opposite the lay.
  • A. Unlay the end 4 or 5 turns.
  • B. Tuck strand 2 over strand c, under b, and out between strands a & b.
  • C. Tuck strand 1 once over strand b & under a.
  • D. Tuck strands twice, as shown for strand 2.
Back to Contents

Back to net & rope index