Glossary
Back to net & rope index
Backing: The supporting rope for a sea fishing net.
Bating: Decreasing number of meshes in a row.
Bolt rope: The rope around a net. (Or the length of the net. Can be attached after the net is made, whereas the head rope is used to start the net.)
Braiding: Alternative name for netting.
Coir: Ropemaking fiber, from coconuts.
Cotton: Ropemaking fiber.
Creasing: Increasing number of meshes in a row.
Creasing, sliding: Simplified method of creasing.
Cringle: Rope loop on side of another rope.
Cutching: Method of proofing nets.
Diamond mesh: A mesh that points upwards, that is, toward the end rope when hanging vertically.
Doubling: Doubling the twine so as to increase the strength.
False mesh: An extra mesh.
Fid: Spike, of metal or wood, usually round but metal might be hollow, used for splicing 2 ropes together.
Figure-of-8: A knot used as a stopper at the end of a rope and also to join two ropes together.
Flat knot: Reef knot.
Flax: Ropemaking fiber, from the leaf of the flax plant.
Grommet: Endless rope ring.
Half-mesh: Loops formed at the start of a net.
Halver: 3-legged mesh.
Head rope: Rope used at the top of a net, as viewed when it is hanging vertically during the start of the net.
Hemp: Ropemaking fiber - related to marijuana but not smoked.
Increasing: Adding to the number of meshes in a row.
Lazy mesh: Formed when changing from round to spiral.
Manila: Ropemaking fibers, from the banana plant.
Marlinespike: Steel spike.
Mesh stick: Mesh gauge; a stick used to gauge the size of a mesh; in particular the mesh stick is used to guide the netmaker.
Mounting: Fixing to bolt rope.
Nylon: Synthetic ropemaking fiber.
Ossel: Rope between fishing net and backing rope.
Peg board: Device for holding nets when starting netmaking.
Rope, bolt: Rope around the edge of a net.
Rope, head: Rope at the top of a net (when starting).
Round nets: Nets made from the center outwards.
Round: Alternative name for a row of meshes.
Short splice: Method of joining rope.
Shuttle: Netting needle.
Sisal: Ropemaking fiber.
Sliding creasing: A method of increasing the number of meshes in a row.
Spike, marline: Steel spike.
Spool: Mesh gauge.
Square meshes: Meshes with 2 sides parallel to the head rope, and other 2 sides parallel to the side of the net (as in a tennis net).
Stick, mesh: Netting gauge, to gauge the size of a mesh.
Stopper knot: a knot at the end of a rope to stop it sliding free thru a cleat or similar; to stop it escaping.
Tapering: Reducing the number of meshes in a row.
3-legged mesh: mesh with one broken strand.
Toggle: Wooden button.
Trawler's knot: Sheet bend.
Weaver's knot: Sheet bend.
Whipping Method of preventing a rope from fraying, by winding a much thinner cord or twine around it, and knotting it in place.
Back to net & rope index